New starter safety induction checklist for small businesses
A practical safety induction checklist for small hospitality, retail and accommodation businesses, covering first shifts, supervision and training records.
5 minute read · Published · Updated

A new starter can know the job and still be unfamiliar with your workplace. They may have used a coffee machine, stocked shelves or cleaned guest rooms before, but they will not know your equipment, emergency arrangements or who to ask for help.
For a small hospitality, retail or accommodation business, a useful induction connects safety information to the work someone will actually do. Use the steps below to prepare for their first shift, then build on them through supervised practice and follow-up.
Know what this checklist can do
Under the model WHS framework, businesses have duties to provide the information, training, instruction and supervision needed to protect workers. Victoria has its own OHS framework and also requires employers to provide appropriate training. Your duties depend on the laws and risks that apply to your workplace. Safe Work Australia and WorkSafe Victoria explain these responsibilities.
This is a practical starting point, not a mandatory form or a guarantee of compliance. Training also needs to sit alongside effective risk controls, safe equipment and safe systems of work.
Guidance for this section: Safe Work Australia — induction and training · WorkSafe Victoria — induction and training
Prepare before the first shift
Choose someone who knows the work to lead the induction and supervise the new starter. Set aside time when that person can focus on explaining and demonstrating, rather than trying to squeeze everything into the busiest part of service.
Check previous experience without assuming it transfers to every task. Identify any required licences or qualifications separately. Ask what would help the person understand the training, such as demonstrations, pictures, translated information or additional practice. Make clear which tasks they must not attempt until trained and authorised.
Safe Work Australia recommends adapting training to the worker, the job and the level of risk, and making sure it is understood. See its training and support guidance.
Guidance for this section: Safe Work Australia — training and support guidance
Walk through the actual workplace
Take the new starter through the areas they will use. Show emergency exits, the evacuation route and assembly point, first aid supplies and how to contact the relevant first aider or emergency coordinator. Introduce their supervisor and any health and safety representative.
Explain the hazards and controls in their own work area. Depending on the role, this might include wet floors, hot surfaces, moving stock, cleaning products or an aggressive customer. Show what to do when something is unsafe, including how to pause the task and get help. Avoid relying on a folder they have not had time to read.
The core induction topics are outlined in Safe Work Australia’s new-worker guidance. Its food services risk guide gives relevant hospitality examples.
Guidance for this section: Safe Work Australia — Safe Work Australia’s new-worker guidance · Safe Work Australia — food services risk guide
Demonstrate and check understanding
Explain a task, demonstrate your safe procedure, then let the worker practise under appropriate supervision. Include any equipment and protective gear the task requires. Check that they can perform the work safely before allowing them to work without direct supervision. A completed online lesson alone cannot establish this.
Ask specific questions instead of only asking whether everything makes sense:
- Where would you go if the evacuation alarm sounded?
- Who would you tell about a spill, damaged equipment or a near miss?
- What would you do if you were asked to use equipment you had not been trained on?
Give constructive feedback and repeat the demonstration where needed. Safe Work Australia’s task-specific training guidance emphasises supervised practice and checking that workers can apply safe procedures.
Guidance for this section: Safe Work Australia — Safe Work Australia’s task-specific training guidance
Make it easy to speak up
Show the reporting process rather than simply saying “tell someone”. Identify who is available during the worker’s actual shifts, including when the manager is away. Explain how to raise concerns about hazards, injuries, near misses, bullying or customer aggression.
New workers may be reluctant to ask questions. Invite them to check again whenever they are unsure, and respond helpfully when they do. WorkSafe Tasmania highlights this in its induction guidance.
Guidance for this section: WorkSafe Tasmania — induction guidance
Keep a simple induction record
Adapt this checklist to the role and mark an item complete only after it has been covered and understood:
- Supervisor and key safety contacts introduced.
- Work areas, hazards and controls explained.
- Emergency arrangements and first aid shown.
- Hazard, incident and concern reporting practised.
- Relevant safe work procedures demonstrated.
- Required protective equipment provided and explained.
- Understanding and practical performance checked.
- Remaining training, supervision and follow-up recorded.
Record the worker’s name, role, date, trainer, topics covered and any outstanding actions. Keeping records for all training is good practice; specific work can have legal recordkeeping requirements. A signature records an acknowledgement, not proof that someone can safely do every task. See Safe Work Australia’s training records guidance.
Guidance for this section: Safe Work Australia — Safe Work Australia’s training records guidance
Follow up after the first shift
A practical approach is a short check-in after the first shift and another during the first week. Ask what was unclear, observe the work and adjust supervision. Those timings are suggestions, not a universal legal schedule. Revisit training when tasks, equipment or procedures change. WorkSafe Victoria recommends follow-up and refresher training.
Guidance for this section: WorkSafe Victoria — induction and training
Support the awareness component
Explore Ozzie Spark Safety for workplace safety awareness training and completion records. Use it alongside your own site-specific induction, practical instruction and supervision. Awareness certificates are not accredited qualifications or site-specific competency sign-off.
General information only. Check your applicable regulator’s guidance and obtain advice for risks or requirements specific to your workplace. Food-safety training and operating requirements need separate attention.
Official sources and scope
These sources inform general principles. State guidance describes its own jurisdiction; it does not establish the law everywhere in Australia. Linked authorities have not endorsed this article or Ozzie Spark.
- Safe Work Australia — induction and training
National model WHS guidance; check local adoption · Source checked
Guidance informing: Know what this checklist can do. Check applicability with the regulator where the work takes place. - WorkSafe Victoria — induction and training
Victoria — separate OHS framework · Source checked
Guidance informing: Know what this checklist can do. Check applicability with the regulator where the work takes place. - Safe Work Australia — training and support guidance
National model WHS guidance; check local adoption · Source checked
Guidance informing: Prepare before the first shift. Check applicability with the regulator where the work takes place. - Safe Work Australia — Safe Work Australia’s new-worker guidance
National model WHS guidance; check local adoption · Source checked
Guidance informing: Walk through the actual workplace. Check applicability with the regulator where the work takes place. - Safe Work Australia — food services risk guide
National model WHS guidance; check local adoption · Source checked
Guidance informing: Walk through the actual workplace. Check applicability with the regulator where the work takes place. - Safe Work Australia — Safe Work Australia’s task-specific training guidance
National model WHS guidance; check local adoption · Source checked
Guidance informing: Demonstrate and check understanding. Check applicability with the regulator where the work takes place. - WorkSafe Tasmania — induction guidance
Tasmania · Source checked
Guidance informing: Make it easy to speak up. Check applicability with the regulator where the work takes place. - Safe Work Australia — Safe Work Australia’s training records guidance
National model WHS guidance; check local adoption · Source checked
Guidance informing: Keep a simple induction record. Check applicability with the regulator where the work takes place.
Source checking is separate from independent professional review. No professional review or regulatory approval is claimed. Recheck guidance when tasks, hazards or work arrangements change.